PRODUCTS DETAILS
Shanghai TaiXiong Magnetic Industrial Co., Ltd
You are here: Home » Products » Magnetic Separator » Drum Magnetic Separator » Drum Magnetic Separator

loading

Share to:

Drum Magnetic Separator

Drum magnetic separators remove large and small iron contaminants from material processing lines. Powerful permanent magnet magnetic separators deliver more efficient separation performance for a wider range of application scenarios than ever before. The full range includes standard models in diameters from 12 to 36 inches (305 to 915 mm) and widths from 12 to 60 inches (305 to 1525 mm). These units can separate volumes up to 25,600 cubic feet (725 cubic meters) per hour. This type of equipment can automatically remove tramp iron from large streams of bulk materials, including large and highly abrasive materials, for many years without any glitches.
Availability:
Product Description

Short Description

Magnetic drum separators have a wide range of applications. They are used in free-fall chutes or after a vibratory chute for powder (even fine powders), granulates, fibres and coarser product streams (non-sticky). They continuously and fully automatically separate ferromagnetic (Fe) particles, such as iron and steel.

If the material is supplied via vibratory chute, it is possible to separate weakly magnetic particles, such as particles from machined stainless steel, and even paramagnetic particles. Due to the continuous cleaning, the drum magnet is very suitable for product flows with heavy magnetic particle contamination.

We supply various drum magnets:

For fine or coarse product streams

For small or large capacities

For material containing little/lots of magnetic particles

For various industries : From the food industry to recycling

Prevention of ferromagnetic or paramagnetic contamination in your finished product

Prevention of avoidable damage to machines (injection-moulding machines, extruders, mixers, grinders and other equipment).

The standaed magnetic drum separator is suitable for coarser raw materials in the plastics and ceramics industries.

The food/pharma drum magnets have been specifically developed for the food and pharma industries. They have a small capacity yet filer smaller Fe (and even weak magnetic) particles out of a product stream.

The lenastar even filter out paramagnetic particles such as stones, mud, insect excrement, etc. From your dried raw material (e.e. tea, spices).


Working Principle

pdf3 20200504002531_78138

Drum



Specifications

Drum Diameter Drum Width Capacity A B C D E F G
CC RE CC RE
in in mm ft3/hr m3/hr in mm in mm in mm in mm in mm in mm in mm in mm in mm
12 (305mm)  45 rpm 12 305 1000 28 34-3/4 883 22 559 22 559 16-1/8 410 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
14 356 1200 34 34-3/4 883 22 559 22 559 18-1/8 460 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
16 406 1400 40 34-3/4 883 22 559 22 559 20-1/8 511 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
18 457 1600 45 34-3/4 883 22 559 22 559 22-1/8 562 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
20 508 1800 50 34-3/4 883 22 559 22 559 24-1/8 613 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
24 610 2200 62 34-3/4 883 22 559 22 559 28-1/8 714 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
30 762 2800 80 34-3/4 883 22 559 22 559 34-1/8 867 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
36 915 3300 93 34-3/4 883 22 559 22 559 40-1/8 1019 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
42 1067 3900 110 34-3/4 883 22 559 22 559 46-1/8 1172 11-3/4 298 7-15/16 202 8 203 8 203 7-1/4 184
15 (381mm)40 rpm 12 305 1250 35 39-1/2 1003 25 635 29 737 16-1/8 410 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
14 356 1500 42 39-1/2 1003 25 635 29 737 18-1/8 460 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
16 406 1750 50 39-1/2 1003 25 635 29 737 20-1/8 511 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
18 457 2000 57 39-1/2 1003 25 635 29 737 22-1/8 562 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
20 508 2200 62 39-1/2 1003 25 635 29 737 24-1/8 613 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
24 610 2700 76 39-1/2 1003 25 635 29 737 28-1/8 714 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
30 762 3400 96 39-1/2 1003 25 635 29 737 34-1/8 867 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
36 915 4100 116 39-1/2 1003 25 635 29 737 40-1/8 1019 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
42 1067 4800 136 39-1/2 1003 25 635 29 737 46-1/8 1172 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
48 1219 5500 156 39-1/2 1003 25 635 29 737 52-1/8 1324 14-3/8 365 11-5/8 295 6 152 10 254 8-3/8 213
18 (457mm)  35 rpm 12 305 1600 45 45-1/4 1149 28 711 28 711 16-1/8 410 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
14 356 1900 54 45-1/4 1149 28 711 28 711 18-1/8 460 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
16 406 2200 62 45-1/4 1149 28 711 28 711 20-1/8 511 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
18 457 2500 71 45-1/4 1149 28 711 28 711 22-1/8 562 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
20 508 2800 79 45-1/4 1149 28 711 28 711 24-1/8 613 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
24 610 3400 96 45-1/4 1149 28 711 28 711 28-1/8 714 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
30 762 4300 122 45-1/4 1149 28 711 28 711 34-1/8 867 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
36 915 5200 147 45-1/4 1149 28 711 28 711 40-1/8 1019 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
42 1067 6100 173 45-1/4 1149 28 711 28 711 46-1/8 1172 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
48 1219 7000 198 45-1/4 1149 28 711 28 711 52-1/8 1324 14-3/8 365 10-7/8 276 10-7/8 257 10-7/8 257 8-3/8 213
24 (610mm)  30 rpm 18 457 3700 105 59 1500 38 965 38 965 25 635 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
20 508 4200 119 59 1500 38 965 38 965 27 686 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
24 610 5100 145 59 1500 38 965 38 965 31 787 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
30 762 6500 185 59 1500 38 965 38 965 37 940 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
36 915 7800 220 59 1500 38 965 38 965 43 1092 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
42 1067 9200 260 59 1500 38 965 38 965 49 1245 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
48 1219 10500 300 59 1500 38 965 38 965 55 1397 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
54 1372 11900 340 59 1500 38 965 38 965 61 1550 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251
60 1524 13200 375 59 1500 38 965 38 965 67 1702 19-1/2 495 18-7/8 479 9 229 9 229 9-7/8 251






ABOUT US

With over 20 years of experience in the design and manufacture of high performance magnetic systems, we supply critical magnetic equipment to some of the leading names in the most demanding industries. We are firmly equipment.

QUICK LINKS

PRODUCT CATEGORY

CONTACT INFO

Address : No.334 Xinghuo Road, QianQiao Town, FengXian District, Shanghai, China
Tel : +86-021-57599048 / +86-021-57599009
Phone : +86-13681717549
Skype : joanna880102
E-mail : Yingyun@taixiongmagnet.com
joannazhou@taixiongmagnet.com
Copyright © 2023 Shanghai TaiXiong Magnetic Industrial Co., Ltd   Sitemap | Privacy Policy | Supported by leadong.com